Nice find. I didn’t realize that there was a separate plugin for AMD GPUs. That’s great info. Thanks for sharing it.
So, I have loaded the new driver, updated windows, Loaded the newest Firmware and it seems to be working ok other than randomly shutting off during stream. This happens anywhere between 20 and 50 minutes into my testing. The battery is fine and I am able to manually power back on and continue on my merry way. I have verified in settings via phone app that auto power off is set to “Off”. Could this simply be overheating? Any ideas to try?
Try changing the USB cable and possibly USB port
When you touch your camera, is it hot?
Heat could be a problem, but I would suggest trying the above first. I tested the camera for several hours in live streaming without it shutting off. I did not need to change sleepDelay or offDelay, but it might be a factor. My camera doesn’t get hot to the touch.
The new firmware 1.10.1 improved these:
- The precision of video slant top/bottom correction has been improved.
- Still image joining accuracy has been improved.
- The quality of the still image is improved by modifying the compression ratio.
- Corrected bugs and improved performance.
I believe the App only sets Sleepdelay, not offdelay. It just suddenly blinks red on the status lamp and then makes three beeps and powers off. It is over 80 Degrees currently where I am running it and yes it does feel rather warm. I am using an active extension cable (16.4 feet) from my PC with a powered USB hub in line just before the camera to ensure it has enough juice to charge while streaming. I have just moved it to sit directly in the flow of my air conditioning to eliminate the possibility of it being an over-heating issue. Did you use an extension cable for the 2-hour test you ran or direct connect the 1-foot adapter it comes with?
I ran the test with a direct USB cable, longer than 1 foot, but without an extension. It’s about 3 feet long. I tested it indoors in a room with air-conditioning.
From reading the documentation, it should not turn off if it does not sleep, so the sleepDelay is probably enough.
Can you test it without the extension cable first to rule out that possibility.
I have my camera plugged into a USB 3.0 port, which supplies a bit more power.
Overheating is confirmed on my Theta V. I have just placed it in the direct flow of my Air conditioner and it has worked like a champ for almost 3 hours. I am going to try and figure out where the break point is when I can control the room temperature a bit better. But 85 degrees is definitely a problem.
Thanks for the update. Sorry to hear about the heat.
Under certain conditions, the THETA S would also overheat. There are several hacks to try and alleviate the problem. One possible solution is to take a standard household fan and blow it at the camera. Another is to make a fan holder like this:
People have used Raspberry Pi heat sinks on the body of the THETA S.
This heatsink kit is $6.79 and attaches with sticky tape supplied with the heat sink.
It’s also possible that a future firmware upgrade will make the streaming slightly more efficient and help with the heating problem.
Although not ideal, maybe the external heat sinks with an external fan might help.
Hello.I have only a Theta-s. Do you konw the best quality of Theta-s Live Streaming with proper driver?Can it achieve 2K(1920*1080).?Thank you for your answer.
See this for the THETA S
1920x1080 @ 30fps with THETA UVC FullHD Blender which is free software you can download.
Sorry to bother you again.Thanx for your reply some time ago.In Overview, I saw words next:
“HDMI Live Streaming Specifications (RICOH THETA S only)
Dual-Fisheye data in uncompressed YCbCr format is output.
Image size: 1920x1080 / 1280x720 / 720x480
Frame rate: 30fps”
Do you know how to get a video in the form of uncompressed YCbCr(yuv)?I searched for long time but get nowhere.Maybe i must use APi/SDK?If you have some advice ,please share with me . I know it may be not easy,anyway。
Sorry, I don’t know much about this type of video technology or equipment. I’m more of a novice with video standards. The information you’re referring to is here: https://developers.theta360.com/en/docs/introduction/
I don’t have any experience with cards like the Blackmagic Intensity, but I was assuming that you could use those cards to get HDMI video into your computer. I actually don’t know the difference between YCbCr and 4:2:2 YUV myself. I do know that people are using different types of HDMI cards to get the HDMI video into computers, but I don’t know about the technical specifications. The HDMI video is usually popular for people that want to use something like the Teradek VidiU or the Cerevo LiveShell to stream video to something like YouTube without a computer.
Happy to continue the discussion, but just keep in mind that I have limited knowledge of the external HDMI video equipment, so what I mention may not be technically correct.
Maybe someone else can help out here?
Hi guys !
I’m trying to launch a facebook live with a ricoh theta v and Mac OS El Capitan, but my laptop is not reconizing the camera. Anyone can help ?
Did you see this article?
Are you using OBS?
Yes I do but OBS doesn’t recognize ricoh theta v
Does the THETA V work as a webcam in QuickTime?
You have the THETA V in live mode, right?
Are you plugging it into a standard USB port on your Mac, or are you using a USB adapter? I’ve seen some problems with different USB adapters on the Mac. Make sure the connection between the Mac on the THETA V is working by using QuickTime first. If it works in QuickTime, you can move to OBS.
@codetricity Could you please DM me a link to the beta driver for THETA UVC 4K? Thanks, I really appreciate it.
Sent by email and DM. It’s now publicly available from the Ricoh site as well.
my laptop is i7 7700HG ram8GB nvidia 1050
run with theta v uvc 4k driver with obs is very hight CPU load 100% i can not stream.
i try theta v driver (not uvc 4k ) with MPC-HC to preview is low cpu use 20%.
i need theta v driver (not uvc 4k ) use with OBS for low cpu use.
i need theta v driver (not uvc 4k ) for obs (new version).
Please anyone sent new theta v driver (not uvc 4k ) .
my email is email@example.com
The screenshot you posted is from a Mac. The THETA V driver only works on OBS with a Mac.
If you want to use the THETA V driver on Windows 10, you need to use Media Player Classic, not OBS.
Read this post.
Just wondering if the UVC 4K driver is one of the UVC 1.5 category and can we modify it under .net environment?
I have a task using Theta V and push image from theta to other app automatically.
Thanks again for you posting