Could you advise me to get rid of this issue? it’s urgent command 1: gst-launch-1.0 thetauvcsrc mode=4K ! queue ! h264parse ! decodebin ! queue ! autovideosink sync=false OUTPUT: Setting pipeline to PAUSED … ERROR: Pipeline doesn’t want to pause. ERROR: from element /GstPipeline:pipeline0/GstThet…

I’m running the same version of Jetpack [image] Live Streaming over USB on Ubuntu and Linux, NVIDIA Jetson I’ve been using Jetpack 4.6, which corresponds to L4T R32, Revision 6.1. cat /etc/nv_tegra_release # R32 (release), REVISION: 6.1 I recently met with a community…

thanks @Craig we bought 3 Ricoh theta z1 after seeing your post and videos, we thought this could help us in our case but now we’re facing issues but I knew it will be fixed by your support.

cat /etc/nv_tegra_release R32 (release), REVISION: 7.4, GCID: 33514132, BOARD: t210ref, EABI: aarch64, DATE: Fri Jun 9 04:25:08 UTC 2023

Do you know how to upgrade the firmware inside the RICOH THETA Z1? If you connect the Z1 to a computer with Wifi when the Z1 is a hotspot, you can get the firmware version with: http://192.168.1.1/osc/info

Yes, I will do this @Craig thanks I want to use gstthetauvc with opencv for live streaming so please guide me for this.

[image] [image] [image] not working

Is the camera mounted as a filesystem? [image] Disable THETA Automount on Linux and NVIDIA Jetson for USB API API Usage When using the RICOH THETA with the USB API, the camera may be inaccessible. With the RICOH THETA Z1 and ptpcam, you may see this type of e…

@Vijay_Saw unfortunately, there is something wrong with my Jetson Nano and I don’t have equipment to test this with right now. However, I did install and run Jetpack 7.1 (nv_tegra_release) in June of 2023 and it worked fine. I remember that someone else at a University was having the same problem…

I also used Etcher to flash the image and today I reinstalled everything but still I am getting an error the only think I have to do is to update firmware ./gst_loopback start, hit any key to stop Opening in BLOCKING MODE NvMMLiteOpen : Block : BlockType = 261 NVMEDIA: Reading vendor.tegra.dis…

Isn’t that a different error than you had before? The original error you posted was Found 1 Theta(s), but none available. [image] The error you just posted is Error: Internal data stream error. Do you have the viewer working with ./gst_viewer?

Getting errors while live streaming from Theta Z1 + Jetson Nano to opencv

craig March 19, 2024, 6:11pm 14

Is the camera mounted as a filesystem?

Topic		Replies	Views
THETA X USB Live Stream on Linux with OpenCV API Usage video , livestreaming , thetax , opencv	18	519	April 17, 2025
Troubleshooting v4l2loopback Issues on Jetson with Ubuntu 20.04 in ARM Environment 360 Media video , z1 , livestreaming	9	1330	January 22, 2024
NVIDIA Jetson and USB API for RICOH THETA API Usage usbapi , jetson , libptp2	6	1917	May 31, 2023
Ricoh Theta V: Livestreaming with Jetson Xavier, ROS, OpenCV, NUC Camera Hardware and Software livestreaming , plugin , thetav , video	37	6846	September 15, 2021
USB API and Arduino for Camera Trap API Usage	34	5328	December 13, 2019

Getting errors while live streaming from Theta Z1 + Jetson Nano to opencv

Related topics